Chapter 13. Oooh! Arrgh! Ugh! Yecch! Attitudinal and Emotional Indicators

This chapter explains the various words that Lojban provides for expressing attitude and related notions. In natural languages, attitudes are usually expressed by the tone of voice when speaking, and (very imperfectly) by punctuation when writing. For example, the bare words

can be made, through tone of voice, to express the speaker's feeling of happiness, pity, hope, surprise, or disbelief. These fine points of tone cannot be expressed in writing. Attitudes are also expressed with various sounds which show up in print as oddly spelled words, such as the “Oooh!”, “Arrgh!”, “Ugh!”, and “Yecch!” in the title. These are part of the English language; people born to other languages use a different set; yet you won't find any of these words in a dictionary.

In Lojban, everything that can be spoken can also be written. Therefore, these tones of voice must be represented by explicit words known as “attitudinal indicators”, or just “attitudinals”. This rule seems awkward and clunky to English-speakers at first, but is an essential part of the Lojbanic way of doing things.

The simplest way to use attitudinal indicators is to place them at the beginning of a text. In that case, they express the speaker's prevailing attitude. Here are some examples, correlated with the attitudes mentioned following Example 13.1:

The primary Lojban attitudinals are all the cmavo of the form VV or V'V: one of the few cases where cmavo have been classified solely by their form. There are 39 of these cmavo: all 25 possible vowel pairs of the form V'V, the four standard diphthongs (.ai, .au, .ei, and .oi), and the ten more diphthongs that are permitted only in these attitudinal indicators and in names and borrowings (.ia, .ie, .ii, .io, .iu, .ua, .ue, .ui, .uo, and .uu). Note that each of these cmavo has a period before it, marking the pause that is mandatory before every word beginning with a vowel. Attitudinals, like most of the other kinds of indicators described in this chapter, belong to selma'o UI.

Attitudinals can also be compound cmavo, of the types explained in Sections 4-8; Example 13.6 illustrates one such possibility, the compound attitudinal .ianai. In attitudinals, -nai indicates polar negation: the opposite of the simple attitudinal without the -nai. Thus, as you might suppose, .ia expresses belief, since .ianai expresses disbelief.

In addition to the attitudinals, there are other classes of indicators: intensity markers, emotion categories, attitudinal modifiers, observationals, and discursives. All of them are grammatically equivalent, which is why they are treated together in this chapter.

Every indicator behaves in more or less the same way with respect to the grammar of the rest of the language. In general, one or more indicators can be inserted at the beginning of an utterance or after any word. Indicators at the beginning apply to the whole utterance; otherwise, they apply to the word that they follow. More details can be found in Section 13.9.

Throughout this chapter, tables of indicators will be written in four columns. The first column is the cmavo itself. The second column is a corresponding English word, not necessarily a literal translation. The fourth column represents the opposite of the second column, and shows the approximate meaning of the attitudinal when suffixed with -nai. The third column, which is sometimes omitted, indicates a neutral point between the second and fourth columns, and shows the approximate meaning of the attitudinal when it is suffixed with -cu'i. The cmavo cu'i belongs to selma'o CAI, and is explained more fully in Section 13.4.

One flaw that the English glosses are particularly subject to is that in English it is often difficult to distinguish between expressing your feelings and talking about them, particularly with the limited resource of the written word. So the gloss for .ui should not really be “happiness” but some sound or tone that expresses happiness. However, there aren't nearly enough of those that have unambiguous or obvious meanings in English to go around for all the many, many different emotions Lojban speakers can readily express.

Many indicators of CV'V form are loosely derived from specific gismu. The gismu should be thought of as a memory hook, not an equivalent of the cmavo. Such gismu are shown in this chapter between square brackets, thus: [gismu].

Attitudinals make no claim: they are expressions of attitude, not of facts or alleged facts. As a result, attitudinals themselves have no truth value, nor do they directly affect the truth value of a bridi that they modify. However, since emotional attitudes are carried in your mind, they reflect reactions to that version of the world that the mind is thinking about; this is seldom identical with the real world. At times, we are thinking about our idealized version of the real world; at other times we are thinking about a potential world that might or might not ever exist.

Therefore, there are two groups of attitudinals in Lojban. The “pure emotion indicators” express the way the speaker is feeling, without direct reference to what else is said. These indicators comprise the attitudinals which begin with u or o and many of those beginning with i.

The cmavo beginning with u are simple emotions, which represent the speaker's reaction to the world as it is, or as it is perceived to be.

Here are some typical uses of the u attitudinals:

In Example 13.10, note that the attitudinal .uo is translated by an English non-attitudinal phrase: “At last!” It is common for the English equivalents of Lojban attitudinals to be short phrases of this sort, with more or less normal grammar, but actually expressions of emotion.

In particular, both .uu and .u'u can be translated into English as “I'm sorry”; the difference between these two attitudes frequently causes confusion among English-speakers who use this phrase, leading to responses like “Why are you sorry? It's not your fault!”

It is important to realize that .uu, and indeed all attitudinals, are meant to be used sincerely, not ironically. In English, the exclamation “Pity!” is just as likely to be ironically intended, but this usage does not extend to Lojban. Lying with attitudinals is (normally) as inappropriate to Lojban discourse as any other kind of lying: perhaps worse, because misunderstood emotions can cause even greater problems than misunderstood statements.

The following examples display the effects of nai and cu'i when suffixed to an attitudinal:

In Example 13.15, John's coming has been anticipated by the speaker. In Example 13.13 and Example 13.14, no such anticipation has been made, but in Example 13.14 the lack-of-anticipation goes no further – in Example 13.13, it amounts to actual surprise.

It is not possible to firmly distinguish the pure emotion words beginning with o or i from those beginning with u, but in general they represent more complex, more ambivalent, or more difficult emotions.

Here are some examples:

Here the speaker is distressed or discomfited over John's coming. The word .oi is derived from the Yiddish word “oy” of similar meaning. It is the only cmavo with a Yiddish origin.

Here the speaker feels anger over John's coming.

Here there is a sense of danger in John's arrival.

In Example 13.19 and Example 13.20, John's arrival is no problem: in the former example, the speaker feels emotional distance from the situation; in the latter example, John's coming is actually a relief of some kind.

The pure emotion indicators beginning with i are those which could not be fitted into the u or o groups because there was a lack of room, so they are a mixed lot. .ia, i'a, .ie, and i'e do not appear here, as they belong in Section 13.3 instead.

Here are some examples:

Example 13.21 shows an attitude-colored observative; the attitudinal modifies the situation described by the observative, namely the mouse that is causing the emotion. Lojban-speaking toddlers, if there ever are any, will probably use sentences like Example 13.21 a lot.

Example 13.22 and Example 13.23 use attitudinals that follow la djan. rather than being at the beginning of the sentence. This form means that the attitude is attached to John rather than the event of his coming; the speaker loves or disrespects John specifically. Compare:

where it is specifically the coming of John that inspires the feeling.

Example 13.23 is a compact way of swearing at John: you could translate it as “That good-for-nothing John is coming.”

As mentioned at the beginning of Section 13.2, attitudinals may be divided into two groups, the pure emotion indicators explained in that section, and a contrasting group which may be called the “propositional attitude indicators”. These indicators establish an internal, hypothetical world which the speaker is reacting to, distinct from the world as it really is. Thus we may be expressing our attitude towards “what the world would be like if ...”, or more directly stating our attitude towards making the potential world a reality.

In general, the bridi paraphrases of pure emotions look (in English) something like “I'm going to the market, and I'm happy about it”. The emotion is present with the subject of the primary claim, but is logically independent of it. Propositional attitudes, though, look more like “I intend to go to the market”, where the main claim is logically subordinate to the intention: I am not claiming that I am actually going to the market, but merely that I intend to.

There is no sharp distinction between attitudinals beginning with a and those beginning with e; however, the original intent (not entirely realized due to the need to cram too many attitudes into too little space) was to make the members of the a-series the purer, more attitudinal realizers of a potential world, while the members of the e-series were more ambivalent or complex about the speaker's intention with regard to the predication. The relationship between the a-series and the e-series is similar to that between the u-series and the o-series, respectively. A few propositional attitude indicators overflowed into the i-series as well.

In fact, the entire distinction between pure emotions and propositional attitudes is itself a bit shaky: u'u can be seen as a propositional attitude indicator meaning “I regret that ...”, and a'e (discussed below) can be seen as a pure emotion meaning “I'm awake/aware”. The division of the attitudinals into pure-emotion and propositional-attitude classes in this chapter is mostly by way of explanation; it is not intended to permit firm rulings on specific points. Attitudinals are the part of Lojban most distant from the “logical language” aspect.

Here is the list of propositional attitude indicators grouped by initial letter, starting with those beginning with a:

Some examples (of a parental kind):

(In a real-life situation, Examples 3.1-3.7 would also be decorated by various pure emotion indicators, certainly including .oicai, but probably also .iucai.)

Splitting off the attitude into an indicator allows the regular bridi grammar to do what it does best: express the relationships between concepts that are intended, desired, hoped for, or whatever. Rephrasing these examples to express the attitude as the main selbri would make for unacceptably heavyweight grammar.

Here are the propositional attitude indicators beginning with e, which stand roughly in the relation to those beginning with a as the pure-emotion indicators beginning with o do to those beginning with u- they are more complex or difficult:

More examples (after a good night's sleep):

Finally, the propositional attitude indicators beginning with i, which are the overflow from the other sets:

Still more examples (much, much later):

Example 13.40 illustrates the use of a propositional attitude indicator, i'e, in both the usual sense (at the beginning of the bridi) and as a pure emotion (attached to do). The event expressed by the main bridi is disapproved of by the speaker, but the referent of the sumti in the x1 place (namely the listener) is approved of.

To indicate that an attitudinal discussed in this section is not meant to indicate a propositional attitude, the simplest expedient is to split the attitudinal off into a separate sentence. Thus, a version of Example 13.32 which actually claimed that the listener was or would be driving the car might be:

In Lojban, all emotions and attitudes are scales. These scales run from some extreme value (which we'll call “positive”) to an opposite extreme (which we'll call “negative”). In the tables above, we have seen three points on the scale: “positive”, neutral, and “negative”. The terms “positive” and “negative” are put into quotation marks because they are loaded words when applied to emotions, and the attitudinal system reflects this loading, which is a known cultural bias. Only two of the “positive” words, namely .ii (fear) and .oi (pain/complaint), represent emotions commonly thought of as less “virtuous” in most cases than their negative counterparts. But these two were felt to be instinctive, distinct, and very powerful emotions that needed to be expressible in a monosyllable when necessary, while their counterparts are less commonly expressed.

(Why the overt bias? Because there are a lot of attitudinals and they will be difficult to learn as an entire set. By aligning our scales arbitrarily, we give the monosyllable nai a useful meaning and make it easier for a novice to recognize at least the positive or negative alignment of an indicator, if not the specific word. Other choices considered were “random” orientation, which would have unknown biases and be difficult to learn, and orientation based on our guesses as to which scale orientations made the most frequent usages shorter, which would be biased in favor of American perceptions of “usefulness”. If bias must exist in our indicator set, it might as well be a known bias that eases learning, and in addition might as well favor a harmonious and positive world-view.)

In fact, though, each emotional scale has seven positions defined, three “positive” ones (shown below on the left), three “negative” ones (shown below on the right), and a neutral one indicating that no particular attitude on this scale is felt. The following chart indicates the seven positions of the scale and the associated cmavo. All of these cmavo, except nai, are in selma'o CAI.

A scalar attitude is expressed by using the attitudinal word, and then following it by the desired scalar intensity. The bias creeps in because the “negative” emotions take the extra syllable nai to indicate their negative position on the axis, and thus require a bit more effort to express.

Much of this system is optional. You can express an attitude without a scale indicator, if you don't want to stop and think about how strongly you feel. Indeed, for most attitudinals, we've found that either no scalar value is used, or cai is used to indicate especially high intensity. Less often, ru'e is used for a recognizably weak intensity, and cu'i is used in response to the attitudinal question pei (see Section 13.10) to indicate that the emotion is not felt.

The following shows the variations resulting from intensity variation:

You can also utter a scale indicator without a specific emotion. This is often used in the language: in order to emphasize a point about which you feel strongly, you mark what you are saying with the scale indicator cai. You could also indicate that you don't care using cu'i by itself.

Each of the attitude scales constitutes an axis in a multi-dimensional space. In effect, given our total so far of 39 scales, we have a 39-dimensional space. At any given time, our emotions and attitudes are represented by a point in this 39-dimensional space, with the intensity indicators serving as coordinates along each dimension. A complete attitudinal inventory, should one decide to express it, would consist of reading off each of the scale values for each of the emotions, with the vector sum serving as a distinct single point, which is our attitude.

Now no one is going to ever utter a string of 100-odd attitudinals to express their emotions. If asked, we normally do not recognize more than one or two emotions at a time – usually the ones that are strongest or which most recently changed in some significant way. But the scale system provides some useful insights into a possible theory of emotion (which might be testable using Lojban), and incidentally explains how Lojbanists express compound emotions when they do recognize them.

The existence of 39 scales highlights the complexity of emotion. We also aren't bound to the 39. There are modifiers described in Section 13.6 that multiply the set of scales by an order of magnitude. You can also have mixed feelings on a scale, which might be expressed by cu'i, but could also be expressed by using both the “positive” and “negative” scale emotions at once. One expression of “fortitude” might be .ii.iinai- fear coupled with security.

Uttering one or more attitudinals to express an emotion reflects several things. We will tend to utter emotions in their immediate order of importance to us. We feel several emotions at once, and our expression reflects these emotions simultaneously, although their order of importance to us is also revealing – of our attitude towards our attitude, so to speak. There is little analysis necessary; for those emotions you feel, you express them; the “vector sum” naturally expresses the result. This is vital to their nature as attitudinals – if you had to stop and think about them, or to worry about grammar, they wouldn't be emotions but rationalizations.

People have proposed that attitudinals be expressed as bridi just like everything else; but emotions aren't logical or analytical – saying “I'm awed” is not the same as saying “Wow!!!”. The Lojban system is intended to give the effects of an analytical system without the thought involved. Thus, you can simply feel in Lojban.

A nice feature of this design is that you can be simple or complex, and the system works the same way. The most immediate benefit is in learning. You only need to learn a couple of the scale words and a couple of attitude words, and you're ready to express your emotions Lojbanically. As you learn more, you can express your emotions more thoroughly and more precisely, but even a limited vocabulary offers a broad range of expression.

The Lojban attitudinal system was designed by starting with a long list of English emotion words, far too many to fit into the 39 available VV-form cmavo. To keep the number of cmavo limited, the emotion words in the list were grouped together by common features: each group was then assigned a separate cmavo. This was like making tanru in reverse, and the result is a collection of indicators that can be combined, like tanru, to express very complex emotions. Some examples in a moment.

The most significant “common feature” we identified was that the emotional words on the list could easily be broken down into six major groups, each of which was assigned its own cmavo:

Using these, we were able to assign o'u to mark a scale of what we might call “generalized comfort”. When you are comfortable, relaxed, satisfied, you express comfort with o'u, possibly followed by a scale indicator to indicate how comfortable you are. The six cmavo given above allow you to turn this scale into six separate ones, should you wish.

For example, embarrassment is a social discomfort, expressible as .o'unairo'a. Some emotions that we label “stress” in English are expressed in Lojban with .o'unairo'i. Physical distress can be expressed with .o'unairo'o, which makes a nice groan if you say it with feeling. Mental discomfort might be what you feel when you don't know the answer to the test question, but feel that you should. Most adults can recall some instance where we felt sexual discomfort, o'unairo'u. Spiritual discomfort, o'unaire'e, might be felt by a church-goer who has wandered into the wrong kind of religious building.

Most of the time when expressing an emotion, you won't categorize it with these words. Emotional expressions should be quickly expressible without having to think about them. However, we sometimes have mixed emotions within this set, as for example emotional discomfort coupled with physical comfort or vice versa.

Coupling these six words with our 39 attitude scales, each of which has a positive and negative side, already gives you far more emotional expression words than we have emotional labels in English. Thus, you'll never see a Lojban-English emotional dictionary that covers all the Lojban possibilities. Some may be useless, but others convey emotions that probably never had a word for them before, though many have felt them (.eiro'u, for example – look it up).

You can use scale markers and nai on these six category words, and you can also use category words without specifying the emotion. Thus, “I'm trying to concentrate” could be expressed simply as ro'e, and if you are feeling anti-social in some non-specific way, ro'anai will express it.

There is a mnemonic device for the six emotion categories, based on moving your arms about. In the following table, your hands begin above your head and move down your body in sequence.

The implicit metaphors “heart” for emotional and “belly” for physical are not really Lojbanic, but they work fine for English-speakers.

The following cmavo are discussed in this section:

It turned out that, once we had devised the six emotion categories, we also recognized some other commonalities among emotions. These tended to fit nicely on scales of their own, but generally tend not to be thought of as separate emotions. Some of these are self-explanatory, some need to be placed in context. Some of these tend to go well with only a few of the attitudinals, others go with nearly all of them. To really understand these modifiers, try to use them in combination with one or two of the attitudinals found in Section 13.2 and Section 13.3, and see what emotional pictures you can build:

The cmavo ga'i expresses the scale used to indicate condescension or polite deference; it is not respect in general, which is .io. Whatever it is attached to is marked as being below (for ga'i) or above (for ga'inai) the speaker's rank or social position. Note that it is always the referent, not the speaker or listener, who is so marked: in order to mark the listener, the listener must appear in the sentence, as with doi ga'inai, which can be appended to a statement addressed to a social superior.

Note that imperatives in Lojban need not be imperious! Corresponding examples with ga'icu'i and ga'i:

Since ga'i expresses the relative rank of the speaker and the referent, it does not make much sense to attach it to mi, unless the speaker is using mi to refer to a group (as in English “we”), or a past or future version of himself with a different rank.

It is also possible to attach ga'i to a whole bridi, in which case it expresses the speaker's superiority to the event the bridi refers to:

When used without being attached to any bridi, ga'i expresses the speaker's superiority to things in general, which may represent an absolute social rank: ga'icai is an appropriate opening word for an emperor's address from the throne.

The cmavo le'o represents the scale of aggressiveness. We seldom overtly recognize that we are feeling aggressive or defensive, but perhaps in counseling sessions, a psychologist might encourage someone to express these feelings on this scale. And football teams could be urged on by their coach using ro'ole'o. le'o is also useful in threats as an alternative to o'onai, which expresses anger.

The cmavo vu'e represents ethical virtue or its absence. An excess of almost any emotion is usually somewhat “sinful” in the eyes of most ethical systems. On the other hand, we often feel virtuous about our feelings – what we call righteous indignation might be o'onaivu'e. Note that this is distinct from lack of guilt: .u'unai.

The cmavo se'i expresses the difference between selfishness and generosity, for example (in combination with .au):

In both cases, the English “it” is vague, reflecting the absence of a bridi. Example 13.52 and Example 13.53 are pure expressions of attitude. Analogously, .uuse'i is self-pity, whereas .uuse'inai is pity for someone else.

The modifier ri'e indicates emotional release versus emotional control. “I will not let him know how angry I am”, you say to yourself before entering the room. The Lojban is much shorter:

On the other hand, ri'e can be used by itself to signal an emotional outburst.

The cmavo fu'i may express a reason for feeling the way we do, as opposed to a feeling in itself; but it is a reason that is more emotionally determined than most. For example, it could show the difference between the mental discomfort mentioned in Section 13.6 when it is felt on an easy test, as opposed to on a hard test. When someone gives you a back massage, you could use .o'ufu'i to show appreciation for the assistance in your comfort.

The cmavo be'u expresses, roughly speaking, whether the emotion it modifies is in response to something you don't have enough of, something you have enough of, or something you have too much of. It is more or less the attitudinal equivalent of the subjective quantifier cmavo mo'a, rau, and du'e (these belong to selma'o PA, and are discussed in Section 18.8). For example,

might be something you say after a large meal which you enjoyed.

Like all modifiers, be'u can be used alone:

Lastly, the modifier se'a shows whether the feeling is associated with self-sufficiency or with dependence on others.

is something a Lojban-speaking child might say. On the other hand,

from the same child would indicate a (hopefully temporary) loss of self-confidence. It is also possible to negate the e'e in Example 13.54 and Example 13.55, leading to:

and

Some of the emotional expressions may seem too complicated to use. They might be for most circumstances. It is likely that most combinations will never get used. But if one person uses one of these expressions, another person can understand (as unambiguously as the expresser intends) what emotion is being expressed. Most probably as the system becomes well-known and internalized by Lojban-speakers, particular attitudinal combinations will come to be standard expressions (if not cliches) of emotion.

The grammar of indicators is quite simple; almost all facets are optional. You can combine indicators in any order, and they are still grammatical. The presumed denotation is additive; thus the whole is the sum of the parts regardless of the order expressed, although the first expressed is presumed most important to the speaker. Every possible string of UI cmavo has some meaning.

Within a string of indicators, there will be conventions of interpretation which amount to a kind of second-order grammar. Each of the modifier words is presumed to modify an indicator to the left, if there is one. (There is an “unspecified emotion” word, ge'e, reserved to ensure that if you want to express a modifier without a root emotion, it doesn't attach to and modify a previous but distinct emotional expression.)

For example, .ieru'e expresses a weak positive value on the scale of agreement: the speaker agrees (presumably with the listener or with something else just stated), but with the least possible degree of intensity. But .ie ge'eru'e expresses agreement (at an unspecified level), followed by some other unstated emotion which is felt at a weak level. A rough English equivalent of .ie ge'eru'e might be “I agree, but ...” where the “but” is left hanging. (Again, attitudes aren't always expressed in English by English attitudinals.)

A scale variable similarly modifies the previous emotion word. You put the scale word for a root emotion word before a modifier, since the latter can have its own scale word. This merely maximizes the amount of information expressible. For example, .oinaicu'i ro'ucai expresses a feeling midway between pain (.oi) and pleasure (.oinai) which is intensely sexual (ro'u) in nature.

The cmavo nai is the most tightly bound modifier in the language: it always negates exactly one word – the preceding one. Of all the words used in indicator constructs, nai is the only one with any meaning outside the indicator system. If you try to put an indicator between a non-indicator cmavo and its nai negator, the nai will end up negating the last word of the indicator. The result, though unambiguous, is not what you want. For example,

means “I and (unfortunately) you”, whereas

means “I but (fortunately) not you”. Attitudinal nai expresses a “scalar negation”, a concept explained in Section 15.3; since every attitudinal word implies exactly one scale, the effect of nai on each should be obvious.

Thus, the complete internal grammar of UI is as follows, with each listed part optionally present or absent without affecting grammaticality, though it obviously would affect meaning.

attitudinal

nai

intensity-word

nai

modifier

nai

intensity-word

nai

(possiblyrepeated)

ge'e, the non-specific emotion word, functions as an attitudinal. If multiple attitudes are being expressed at once, then in the 2nd or greater position, either ge'e or a VV word must be used to prevent any modifiers from modifying the previous attitudinal.

The behavior of indicators in the “outside grammar” is nearly as simple as their internal structure. Indicator groupings are identified immediately after the metalinguistic erasers si, sa, and su and some, though not all, kinds of quotations. The details of such interactions are discussed in Section 19.16.

A group of indicators may appear anywhere that a single indicator may, except in those few situations (as in zo quotation, explained in Section 19.10) where compound cmavo may not be used.

At the beginning of a text, indicators modify everything following them indefinitely: such a usage is taken as a raw emotional expression, and we normally don't turn off our emotions when we start and stop sentences. In every other place in an utterance, the indicator (or group) attaches to the word immediately to its left, and indicates that the attitude is being expressed concerning the object or concept to which the word refers.

If the word that an indicator (or group) attaches to is itself a cmavo which governs a grammatical structure, then the indicator construct pertains to the referent of the entire structure. There is also a mechanism, discussed in Section 19.8, for explicitly marking the range of words to which an indicator applies.

More details about the uses of indicators, and the way they interact with other specialized cmavo, are given in Chapter 19. It is worth mentioning that real-world interpretation is not necessarily consistent with the formal scope rules. People generally express emotions when they feel them, with only a minimum of grammatical constraint on that expression; complexities of emotional expression are seldom logically analyzable. Lojban attempts to provide a systematic reference that could possibly be ingrained to an instinctive level. However, it should always be assumed that the referent of an indicator has some uncertainty.

For example, in cases of multiple indicators expressed together, the combined form has some ambiguity of interpretation. It is possible to interpret the second indicator as expressing an attitude about the first, or to interpret both as expressing attitudes about the common referent. For example, in

can be interpreted as expressing complaint about the anger, in which case it means “Damn, I snapped at you”; or as expressing both anger and complaint about the listener, in which case it means “I told you, you pest!”

Similarly, an indicator after the final brivla of a tanru may be taken to express an attitude about the particular brivla placed there – as the rules have it – or about the entire bridi which hinges on that brivla. Remembering that indicators are supposedly direct expressions of emotion, this ambiguity is acceptable.

Even if the scope rules given for indicators turn out to be impractical or unintuitive for use in conversation, they are still useful in written expression. There, where you can go back and put in markers or move words around, the scope rules can be used in lieu of elaborate nuances of body language and intonation to convey the writer's intent.

The following cmavo are discussed in this section:

You can ask someone how they are feeling with a normal bridi sentence, but you will get a normal bridi answer in response, one which may be true or false. Since the response to a question about emotions is no more logical than the emotion itself, this isn't appropriate.

The word pei is therefore reserved for attitude questions. Asked by itself, it captures all of the denotation of English “How are you?” coupled with “How do you feel?” (which has a slightly different range of usage).

When asked in the context of discourse, pei acts like other Lojban question words – it requests the respondent to “fill in the blank”, in this case with an appropriate attitudinal describing the respondent's feeling about the referent expression. As with other questions, plausibility is polite; if you answer with an irrelevant UI cmavo, such as a discursive, you are probably making fun of the questioner. (A ge'e, however, is always in order – you are not required to answer emotionally. This is not the same as .i'inai, which is privacy as the reverse of conviviality.)

Most often, however, the asker will use pei as a place holder for an intensity marker. (As a result, pei is placed in selma'o CAI, although selma'o UI would have been almost as appropriate. Grammatically, there is no difference between UI and CAI.) Such usage corresponds to a whole range of idiomatic usages in natural languages:

Example 13.66 might appear at the end of a command, to which the response

corresponds to “Aye! Aye!” (hence the choice of cmavo).

Additionally, when pei is used at the beginning of an indicator construct, it asks specifically if that construct reflects the attitude of the respondent, as in (asked of someone who has been ill or in pain):

Empathy, which is not really an emotion, is expressed by the indicator dai. (Don't confuse empathy with sympathy, which is .uuse'inai.) Sometimes, as when telling a story, you want to attribute emotion to someone else. You can of course make a bridi claim that so-and-so felt such-and-such an emotion, but you can also make use of the attitudinal system by adding the indicator dai, which attributes the preceding attitudinal to someone else – exactly whom, must be determined from context. You can also use dai conversationally when you empathize, or feel someone else's emotion as if it were your own:

It is even possible to “empathize” with a non-living object:

suggesting that the ship felt fear at its impending destruction, and simultaneously reporting the speaker's pity for it.

Both pei and dai represent exceptions to the normal rule that attitudinals reflect the speaker's attitude.

Finally, we often want to report how our attitudes are changing. If our attitude has not changed, we can just repeat the attitudinal. (Therefore, .ui .ui .ui is not the same as .uicai, but simply means that we are continuing to be happy.) If we want to report that we are beginning to feel, continuing to feel, or ceasing to feel an emotion, we can use the attitudinal contour cmavo bu'o.

When attached to an attitudinal, bu'o means that you are starting to have that attitude, bu'ocu'i that you are continuing to have it, and bu'onai that you are ceasing to have it. Some examples:

Note the difference in effect between Example 13.75 and:

which is a straightforward bridi claim. Example 13.76 states that you have (or have had) certain emotions; Example 13.75 expresses those emotions directly.

The following cmavo are discussed in this section:

Now we proceed from the attitudinal indicators and their relatives to the other, semantically unrelated, categories of indicators. The indicators known as “evidentials” show how the speaker came to say the utterance; i.e. the source of the information or the idea. Lojban's list of evidentials was derived from lists describing several American Indian languages. Evidentials are also essential to the constructed language Láadan, designed by the linguist and novelist Suzette Haden Elgin. Láadan's set of indicators was drawn on extensively in developing the Lojban indicator system.

It is important to realize, however, that evidentials are not some odd system used by some strange people who live at the other end of nowhere: although their English equivalents aren't single words, English-speakers have vivid notions of what constitutes evidence, and of the different kinds of evidence.

Like the attitudinal indicators, the evidentials belong to selma'o UI, and may be treated identically for grammatical purposes. Most of them are not usually considered scalar in nature, but a few have associated scales.

A bridi with an evidential in it becomes “indisputable”, in the sense that the speaker is saying “how it is with him or her”, which is beyond argument. Claims about one's own mental states may be true or false, but are hardly subject to other people's examination. If you say that you think, or perceive, or postulate such-and-such a predication, who can contradict you? Discourse that uses evidentials has therefore a different rhetorical flavor than discourse that does not; arguments tend to become what can be called dialogues or alternating monologues, depending on your prejudices.

Evidentials are most often placed at the beginning of sentences, and are often attached to the i that separates sentences in connected discourse. It is in the nature of an evidential to affect the entire bridi in which it is placed: like the propositional attitude indicators, they strongly affect the claim made by the main bridi.

A bridi marked by ja'o is a conclusion by the speaker based on other (stated or unstated) information or ideas. Rough English equivalents of ja'o are “thus” and “therefore”.

A bridi marked by ca'e is true because the speaker says so. In addition to definitions of words, ca'e is also appropriate in what are called performatives, where the very act of speaking the words makes them true. An English example is “I now pronounce you husband and wife”, where the very act of uttering the words makes the listeners into husband and wife. A Lojban translation might be:

The three scale positions of ba'a, when attached to a bridi, indicate that it is based on the speaker's view of the real world. Thus ba'a means that the statement represents a future event as anticipated by the speaker; ba'acu'i, a present event as experienced by the speaker; ba'anai, a past event as remembered by the speaker. It is accidental that this scale runs from future to past instead of past to future.

A bridi marked by su'a is a generalization by the speaker based on other (stated or unstated) information or ideas. The difference between su'a and ja'o is that ja'o suggests some sort of reasoning or deduction (not necessarily rigorous), whereas su'a suggests some sort of induction or pattern recognition from existing examples (not necessarily rigorous).

The opposite point of the scale, su'anai, indicates abduction, or drawing specific conclusions from general premises or patterns.

This cmavo can also function as a discursive (see Section 13.12), in which case su'a means “abstractly” or “in general”, and su'anai means “concretely” or “in particular”.

A bridi marked by ti'e is relayed information from some source other than the speaker. There is no necessary implication that the information was relayed via the speaker's ears; what we read in a newspaper is an equally good example of ti'e, unless we have personal knowledge of the content.

A bridi marked by ka'u is one held to be true in the speaker's cultural context, as a matter of myth or custom, for example. Such statements should be agreed on by a community of people – you cannot just make up your own cultural context – although “objectivity” in the sense of actual correspondence with the facts is certainly not required.

On the other hand, se'o marks a bridi whose truth is asserted by the speaker as a result of an internal experience not directly available to others, such as a dream, vision, or personal revelation. In some cultures, the line between ka'u and se'o is fuzzy or even nonexistent.

A bridi marked by za'a is based on perception or direct observation by the speaker. This use of “observe” is not connected with the Lojban “observative”, or bridi with the first sumti omitted. The latter has no explicit aspect, and could be a direct observation, a conclusion, an opinion, or other aspectual point of view.

A bridi marked by pe'i is the opinion of the speaker. The form pe'ipei is common, meaning “Is this your opinion?”. (Strictly, this should be peipe'i, in accordance with the distinction explained in Examples 10.6-10.8, but since pe'i is not really a scale, there is no real difference between the two orders.)

A bridi marked by ru'a is an assumption made by the speaker. This is similar to one possible use of e'u.

Finally, the evidential ju'a is used to avoid stating a specific basis for a statement. It can also be used when the basis for the speaker's statement is not covered by any other evidential. For the most part, using ju'a is equivalent to using no evidential at all, but in question form it can be useful: ju'apei means “What is the basis for your statement?” and serves as an evidential, as distinct from emotional, question.

The term “discursive” is used for those members of selma'o UI that provide structure to the discourse, and which show how a given word or utterance relates to the whole discourse. To express these concepts in regular bridi would involve extra layers of nesting: rather than asserting that “I also came”, we would have to say “I came; furthermore, the event of my coming is an additional instance of the relationship expressed by the previous sentence”, which is intolerably clumsy. Typical English equivalents of discursives are words or phrases like “however”, “summarizing”, “in conclusion”, and “for example”.

Discursives are not attitudinals: they express no particular emotion. Rather, they are abbreviations for metalinguistic claims that reference the sentence or text they are found in.

Discursives are most often used at the beginning of sentences, often attached to the i that separates sentences in running discourse, but can (like all other indicators) be attached to single words when it seems necessary or useful.

The discursives discussed in this section are given in groups, roughly organized by function. First, the “consecutive discourse” group:

These five discursives are mutually exclusive, and therefore they are not usually considered as scales. The first four are used in consecutive discourse. The first, ku'i, makes an exception to the previous argument. The second, ji'a, adds weight to the previous argument. The third, si'a, adds quantity to the previous argument, enumerating an additional example. The fourth, mi'u, adds a parallel case to the previous argument, and can also be used in tables or the like to show that something is being repeated from the previous column. It is distinct from go'i (of selma'o GOhA, discussed in Section 7.6), which is a non-discursive version of “ditto” that explicitly repeats the claim of the previous bridi.

Lastly, po'o is used when there is no other comparable case, and thus corresponds to some of the uses of “only”, a word difficult to express in pure bridi form:

Note that “only” can go before or after what it modifies in English, but po'o, as an indicator, always comes afterward.

Next, the “commentary on words” group:

The discursives va'i and ta'u operate at the level of words, rather than discourse proper, or if you like, they deal with how things are said. An alternative English expression for va'i is “rephrasing”; for va'inai, “repeating”. Also compare va'i with ke'u, discussed below.

The cmavo ta'u is a discursive unique to Lojban; it expresses the particularly Lojbanic device of tanru. Since tanru are semantically ambiguous, they are subject to misunderstanding. This ambiguity can be removed by expanding the tanru into some semantically unambiguous structure, often involving relative clauses or the introduction of additional brivla. The discursive ta'u marks the transition from the use of a brief but possibly confusing tanru to its fuller, clearer expansion; the discursive ta'unai marks a transition in the reverse direction.

Next, the “commentary on discourse” group:

This group is used by the speaker to characterize the nature of the discourse, so as to prevent misunderstanding. It is well-known that listeners often fail to recognize a humorous statement and take it seriously, or miss an exaggeration, or try to read more into a statement than the speaker intends to put there. In speech, the tone of voice often provides the necessary cue, but the reader of ironic or understated or imprecise discourse is often simply clueless. As with the attitudinals, the use of these cmavo may seem fussy to new Lojbanists, but it is important to remember that zo'o, for example, is the equivalent of smiling while you speak, not the equivalent of a flat declaration like “What I'm about to say is supposed to be funny.”

A few additional English equivalents: for sa'enai, “roughly speaking” or “approximately speaking”; for sa'unai, “furthermore”; for to'u, “in short” or “skipping details”; for do'a, “broadly construed”; for do'anai (as you might expect), “narrowly construed”.

The cmavo pa'e is used to claim (truly or falsely) that one is being fair or just to all parties mentioned, whereas pa'enai admits (or proclaims) a bias in favor of one party.

The scale of je'u and je'unai is a little different from the others in the group. By default, we assume that people speak the truth – or at least, that if they are lying, they will do their best to conceal it from us. So under what circumstances would je'unai be used, or je'u be useful? For one thing, je'u can be used to mark a tautology: a sentence that is a truth of logic, like “All cats are cats.” Its counterpart je'unai then serves to mark a logical contradiction. In addition, je'unai can be used to express one kind of sarcasm or irony, where the speaker pretends to believe what he/she says, but actually wishes the listener to infer a contrary opinion. Other forms of irony can be marked with zo'o (humor) or .ianai (disbelief).

When used as a discursive, su'a (see Section 13.11) belongs to this group.

Next, the “knowledge” group:

These two discursives describe the speaker's state of knowledge about the claim of the associated bridi. They are similar to the propositional attitudes of Section 13.3, as they create a hypothetical world. We may be quite certain that something is true, and label our bridi with ju'o; but it may be false all the same.

Next, the “discourse management” group:

This final group is used to perform what may be called “managing the discourse”: providing reference points to help the listener understand the flow from one sentence to the next.

Other English equivalents of ta'onai are “anyway”, “anyhow”, “in any case”, “in any event”, “as I was saying”, and “continuing”.

The scale of ra'u has to do with the importance of the point being, or about to be, expressed: ra'u is the most important point, ra'ucu'i is a point of equal importance, and ra'unai is a lesser point. Other English equivalents of ra'u are “above all” and “primarily”.

The cmavo ke'u is very similar to va'i, although ke'unai and va'inai are quite different. Both ke'u and va'i indicate that the same idea is going to be expressed using different words, but the two cmavo differ in emphasis. Using ke'u emphasizes that the content is the same; using va'i emphasizes that the words are different. Therefore, ke'unai shows that the content is new (and therefore the words are also); va'inai shows that the words are the same (and therefore so is the content). One English equivalent of ke'unai is “furthermore”.

The discursive da'i marks the discourse as possibly taking a non-real-world viewpoint (“Supposing that”, “By hypothesis”), whereas da'inai insists on the real-world point of view (“In fact”, “In truth”, “According to the facts”). A common use of da'i is to distinguish between:

and:

It is also perfectly correct to omit the discursive altogether, and leave the context to indicate which significance is meant. (Chinese always leaves this distinction to the context: the Chinese sentence

is the equivalent of either Example 13.87 or Example 13.88.)

Some indicators do not fall neatly into the categories of attitudinal, evidential, or discursive. This section discusses the following miscellaneous indicators:

The cmavo ki'a is one of the most common of the miscellaneous indicators. It expresses metalinguistic confusion; i.e. confusion about what has been said, as opposed to confusion not tied to the discourse (which is .uanai). The confusion may be about the meaning of a word or of a grammatical construct, or about the referent of a sumti. One of the uses of English “which” corresponds to ki'a:

Here, the second speaker does not understand the referent of the sumti le ctuca, and so echoes back the sumti with the confusion marker.

The metalinguistic negation cmavo na'i and its opposite jo'a are explained in full in Chapter 15. In general, na'i indicates that there is something wrong with a piece of discourse: either an error, or a false underlying assumption, or something else of the sort. The discourse is invalid or inappropriate due to the marked word or construct.

Similarly, jo'a marks something which looks wrong but is in fact correct. These two cmavo constitute a scale, but are kept apart for two reasons: na'inai means the same as jo'a, but would be too confusing as an affirmation; jo'anai means the same as na'i, but is too long to serve as a convenient metalinguistic negator.

The next two cmavo are used to assist in quoting texts written or spoken by others. It is often the case that we wish to quote only part of a text, or to supply additional material either by way of commentary or to make a fragmentary text grammatical. The cmavo li'o serves the former function. It indicates that words were omitted from the quotation. What remains of the quotation must be grammatical, however, as li'o does not serve any grammatical function. It cannot, for example, take the place of a missing selbri in a bridi, or supply the missing tail of a description sumti: le li'o in isolation is not grammatical.

The cmavo sa'a indicates in a quotation that the marked word or construct was not actually expressed, but is inserted for editorial, narrative, or grammatical purposes. Strictly, even a li'o should appear in the form li'osa'a, since the li'o was not part of the original quotation. In practice, this and other forms which are already associated with metalinguistic expressions, such as sei (of selma'o SEI) or to'i (of selma'o TO) need not be marked except where confusion might result.

In the rare case that the quoted material already contains one or more instances of sa'a, they can be changed to sa'asa'a.

The cmavo xu marks truth questions, which are discussed in detail in Section 15.8. In general, xu may be translated “Is it true that ... ?” and questions whether the attached bridi is true. When xu is attached to a specific word or construct, it directs the focus of the question to that word or construct.

Lojban question words, unlike those of English, frequently do not stand at the beginning of the question. Placing the cmavo pau at the beginning of a bridi helps the listener realize that the bridi is a question, like the symbol at the beginning of written Spanish questions that looks like an upside-down question mark. The listener is then warned to watch for the actual question word.

Although pau is grammatical in any location (like all indicators), it is not really useful except at or near the beginning of a bridi. Its scalar opposite, paunai, signals that a bridi is not really a question despite its form. This is what we call in English a rhetorical question: an example appears in the English text near the beginning of Section 13.11.

The cmavo pe'a is the indicator of figurative speech, indicating that the previous word should be taken figuratively rather than literally:

Here the house is not blue in the sense of color, but in some other sense, whose meaning is entirely culturally dependent. The use of pe'a unambiguously marks a cultural reference: blanu in Example 13.91 could mean “sad” (as in English) or something completely different.

The negated form, pe'anai, indicates that what has been said is to be interpreted literally, in the usual way for Lojban; natural-language intuition is to be ignored.

Alone among the cmavo of selma'o UI, pe'a has a rafsi, namely pev. This rafsi is used in forming figurative (culturally dependent) lujvo, whose place structure need have nothing to do with the place structure of the components. Thus risnyjelca (heart burn) might have a place structure like:

whereas pevrisnyjelca, explicitly marked as figurative, might have the place structure:

which obviously has nothing to do with the places of either risna or jelca.

The uses of bi'u and bi'unai correspond to one of the uses of the English articles “the” and “a/an”. An English-speaker telling a story may begin with “I saw a man who ...”. Later in the story, the same man will be referred to with the phrase “the man”. Lojban does not use its articles in the same way: both “a man” and “the man” would be translated le nanmu, since the speaker has in mind a specific man. However, the first use might be marked le bi'u nanmu, to indicate that this is a new man, not mentioned before. Later uses could correspondingly be tagged le bi'unai nanmu.

Most of the time, the distinction between bi'u and bi'unai need not be made, as the listener can infer the right referent. However, if a different man were referred to still later in the story, le bi'u nanmu would clearly show that this man was different from the previous one.

Finally, the indicator ge'e has been discussed in Section 13.8 and Section 13.10. It is used to express an attitude which is not covered by the existing set, or to avoid expressing any attitude.

Another use for ge'e is to explicitly avoid expressing one's feeling on a given scale; in this use, it functions like a member of selma'o CAI: .iige'e means roughly “I'm not telling whether I'm afraid or not.”

This cmavo is explained in detail in Section 11.8. It marks the word it is attached to as the focus of an indirect question:

“Vocatives” are words used to address someone directly; they precede and mark a name used in direct address, just as la (and the other members of selma'o LA) mark a name used to refer to someone. The vocatives actually are indicators – in fact, discursives – but the need to tie them to names and other descriptions of listeners requires them to be separated from selma'o UI. But like the cmavo of UI, the members of selma'o COI can be “negated” with nai to get the opposite part of the scale.

Because of the need for redundancy in noisy environments, the Lojban design does not compress the vocatives into a minimum number of scales. Doing so would make a non-redundant nai too often vital to interpretation of a protocol signal, as explained later in this section.

The grammar of vocatives is explained in Section 6.11; but in brief, a vocative may be followed by a name (without la), a description (without le or its relatives), a complete sumti, or nothing at all (if the addressee is obvious from the context). There is an elidable terminator, do'u (of selma'o DOhU) which is almost never required unless no name (or other indication of the addressee) follows the vocative.

Using any vocative except mi'e (explained below) implicitly defines the meaning of the pro-sumti do, as the whole point of vocatives is to specify the listener, or at any rate the desired listener – even if the desired listener isn't listening! We will use the terms “speaker” and “listener” for clarity, although in written Lojban the appropriate terms would be “writer” and “reader”.

In the following list of vocatives, the translations include the symbol X. This represents the name (or identifying description, or whatever) of the listener.

The cmavo doi is the general-purpose vocative. Unlike the cmavo of selma'o COI, explained below, doi can precede a name directly without an intervening pause. It is not considered a scale, and doinai is not grammatical. In general, doi needs no translation in English (we just use names by themselves without any preceding word, although in poetic styles we sometimes say “Oh X”, which is equivalent to doi). One may attach an attitudinal to doi to express various English vocatives. For example, doi .io means “Sir/Madam!”, whereas doi .ionai means “You there!”.

All members of selma'o COI require a pause when used immediately before a name, in order to prevent the name from absorbing the COI word. This is unlike selma'o DOI and LA, which do not require pauses because the syllables of these cmavo are not permitted to be embedded in a Lojban name. When calling out to someone, this is fairly natural, anyway. “Hey! John!” is thus a better translation of ju'i .djan. than “Hey John!”. No pause is needed if the vocative reference is something other than a name, as in the title of the Lojban journal, ju'i lobypli.

(Alternatively, doi can be inserted between the COI cmavo and the name, making a pause unnecessary: coi doi djan.)

This cmavo is often combined with other members of COI: fe'omi'e would be an appropriate closing at the end of a letter; re'imi'e would be a self-vocative used in delayed responses, as when called to the phone, or possibly in a roll-call. As long as the mi'e comes last, the following name is that of the speaker; if another COI cmavo is last, the following name is that of the listener. It is not possible to name both speaker and listener in a single vocative expression, but this fact is of no importance, because wherever one vocative expression is grammatical, any number of consecutive ones may appear.

The negative form denies an identity which someone else has attributed to you; mi'enai .djan. means that you are saying you are not John.

Many of the vocatives have been listed with translations which are drawn from radio use: “roger”, “wilco”, “over and out”. This form of translation does not mean that Lojban is a language of CB enthusiasts, but rather that in most natural languages these forms are so well handled by the context that only in specific domains (like speaking on the radio) do they need special words. In Lojban, dependence on the context can be dangerous, as speaker and listener may not share the right context, and so the vocatives provide a formal protocol for use when it is appropriate. Other appropriate contexts include computer communications and parliamentary procedure: in the latter context, the protocol question ta'apei would mean “Will the speaker yield?”

The following dialogue in Lojban illustrates the uses of attitudinals and protocol vocatives in conversation. The phrases enclosed in sei ... se'u indicate the speaker of each sentence.